Component Function Check
WARNING: This page is about a different car, the 2013 Infiniti M56. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM COMPONENT FUNCTION CHECK
With GST
- Turn ignition switch ON.
- Check the voltage between ECM harness connector terminals under the following conditions.
ECM Condition Voltage (V) Connector + - Terminal Terminal F110 11 175 Selector lever P or N position Battery voltage Except above position Approx. 0 V Is the inspection result normal?
YES: INSPECTION END
NO: Proceed to "DIAGNOSIS PROCEDURE ".