LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Transfer Case) >> System Description >> Diagnosis System (Transfer Control Unit) >> CONSULT Function (ALL MODE AWD/4WD) >> Self-Diagnostic Procedure (Without Consult) >> Diagnostic Procedure (M/T models)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure (M/T models)

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm up engine.
  2. Turn ignition switch "ON" and "OFF" at least twice, and then turn ignition switch "OFF".
  3. Move M/T shift lever to neutral position.
  4. Turn 4WD shift switch to "2WD" position.
  5. Turn ignition switch "ON". (Do not start engine.)
  6. 4WD warning lamp should turn ON.

    If 4WD warning lamp does not turn ON, refer to "DIAGNOSIS PROCEDURE ".

  7. Move M/T shift lever to any position other than neutral.
  8. Turn 4WD shift switch to "2WD", "4H" and "2WD" in order.
  9. Move M/T shift lever to neutral position.
  10. Turn 4WD shift switch to "4H", "2WD" and "4H" in order.
  11. Move M/T shift lever to any position other than neutral.
  12. Turn 4WD shift switch to "2WD" position.
  13. Move M/T shift lever to neutral position.
  14. Read the flickering of 4WD warning lamp.

    Refer to "CONSULT FUNCTION (ALL MODE AWD/4WD) " .