Assembly (A/T Models)

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Install clevis pin and shift collar to L-H shift fork after assembling them.
CAUTION: Use caution when installing L-H shift fork, clevis pin or shift collar.
Install clevis pin and shift collar to 2-4 shift bracket after assembling them.
CAUTION: Use caution when installing 2-4 shift bracket.
Install the fork guide collar and 2-4 shift fork spring to the 2-4 shift fork, and then secure it with the retaining ring.
CAUTION:
- Do not reuse retaining ring.
- Be careful with orientation.
Fig 1: Installing Fork Guide Collar And 2-4 Shift Fork Spring To 2-4 Shift Fork
Courtesy of NISSAN NORTH AMERICA, INC.
Install the 2-4 shift bracket to the L-H shift rod.
Install the retaining pin evenly to the L-H shift rod.
CAUTION: Do not reuse retaining pin.

Fig 2: Identifying L-H Shift Rod Retaining Pin
Courtesy of NISSAN NORTH AMERICA, INC.
Install the drum cam to the control shift rod, and then secure it with the retaining pin.
CAUTION: Do not reuse retaining pin.
Install the snap ring to the control shift rod.
CAUTION: Do not reuse snap ring.

Fig 3: Identifying Snap Ring And Retaining Pin
Courtesy of NISSAN NORTH AMERICA, INC.