Component Function Check

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "SLIDE SW-FR", "SLIDE SW-RR" in "Data monitor" mode with CONSULT.

Check sliding switch signal under the following conditions.

Monitor item	Condition		Status
SLIDE SW-FR	Sliding switch (forward)	Operate	ON
SLIDE SW-FR	Sliding switch (forward)	Release	OFF
SLIDE SW-RR	Sliding switch (backward)	Operate	ON
SLIDE SW-RR	Sliding switch (backward)	Release	OFF

Is the indication normal?

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".