System Control Condition Display
Quickly push (less than 1.5 seconds) and release the MAIN switch ON.
The MAIN switch indicator (cruise indicator), set distance indicator, own vehicle indicator, and set vehicle speed indicator come on and ICC system is set to a standby state.
| Condition | Display on ICC system display | ||
|---|---|---|---|
| Standby mode | |||
| Control mode | Without a vehicle ahead | Set vehicle distance (Long) | |
| Set vehicle distance (Middle) | |||
| Set vehicle distance (Short) | |||
| When the vehicle speed exceeds the set speed | |||
| With a vehicle ahead | Set vehicle distance (Long) | ||
| Set vehicle distance (Middle) | |||
| Set vehicle distance (Short) | |||
| When the vehicle speed exceeds the set speed | |||
NOTE:
The display of the DCA system is given priority when the DCA system is ON in a standby mode. (The set vehicle speed indicator, set distance indicator, and own vehicle indicator are not displayed). Refer to
"SYSTEM DESCRIPTION
".