Method Of Starting

Perform Self-diagnosis, according to the following steps:

Fig 1: Self-Diagnosis Procedure Chart

Courtesy of NISSAN NORTH AMERICA, INC.

• When a sound is not outputted from the speakers as a result of the preparation, check the AV control unit, active noise control unit, connector connections, or speakers.
• When Self-diagnosis mode does not start at Step 1, check the door state signal circuit.
• When a malfunction is detected in the microphone at Step 8, check the signal circuit of each microphone.
• When an error is detected in an engine speed signal at Step 10, check the engine speed signal circuit.