LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> QX56 RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0171 To P0463 >> DTC P0340, P0345: CMP Sensor >> DTC Logic >> DTC Detection Logic
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

DTC Detection Logic

DTC No. Trouble diagnosis name
(Trouble diagnosis content)		 DTC detecting condition Possible cause
P0340 CMP SEN/CIRC-B1
[Camshaft position sensor (bank 1) circuit]
  • The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking.
  • The cylinder No. signal is not sent to ECM during engine running.
  • The cylinder No. signal is not in the normal pattern during engine running.
  • Harness or connectors

    [Camshaft position sensor (bank 1) circuit is open or shorted.]

    (APP sensor 2 circuit is shorted.)

    (Battery current sensor circuit is shorted.)

    [Crankshaft position sensor circuit is shorted.]

    (Refrigerant pressure sensor circuit is open or shorted.)

    (EVAP control system pressure sensor circuit is open or shorted.)

  • Camshaft position sensor (bank 1)
  • Accelerator pedal position sensor
  • Battery current sensor
  • Crankshaft position sensor
  • Refrigerant pressure sensor
  • EVAP control system pressure sensor
  • Camshaft (INT)
  • Starter motor
  • Starting system circuit
  • Dead (Weak) battery
P0345 CMP SEN/CIRC-B2
[Camshaft position sensor (bank 2) circuit]
  • Harness or connectors

    [Camshaft position sensor (bank 2) circuit is open or shorted.]

  • Camshaft position sensor (bank 2)
  • Camshaft (INT)
  • Starter motor
  • Starting system circuit
  • Dead (Weak) battery
scientia non olet · About LEMON Manuals