DAST 2: Diagnosis Procedure
- PERFORM SELF-DIAGNOSIS
With CONSULT
- Turn the ignition switch ON.
- Erase self-diagnosis for "DAST 2".
- Turn the ignition switch OFF and wait for at least 10 seconds.
- Start the engine.CAUTION: Never drive the vehicle.
- Perform self-diagnosis for "DAST 2".
Is DTC "C13A0-00" detected?
YES: Replace steering angle sub control module. Refer to "REMOVAL AND INSTALLATION ".
NO: Check the intermittent incident. Refer to "INTERMITTENT INCIDENT ".