Application Item
CONSULT can display each diagnostic item using the diagnostic test modes as follows.
| Mode |
Function description |
| ECU identification |
Parts number of chassis control module can be read. |
| Self Diagnostic Results |
Self-diagnostic results and freeze frame data can be read and erased quickly. |
| DATA MONITOR |
Input/Output data in chassis control module can be read. |
| ACTIVE TEST |
Send the drive signal from CONSULT to the actuator. The operation check can be performed. |
| Work Support |
Components can be quickly and accurately adjusted. |
| Re/programming, Configuration |
- Read and save the vehicle specification (TYPE ID).
- Write the vehicle specification (TYPE ID) when replacing chassis control module.
|