Av Communication System

WARNING: This page is about a different variant/trim than selected.

Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

Fig 1: Identifying Soldered And Taped Repaired Area
Courtesy of NISSAN NORTH AMERICA, INC.
Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

Fig 2: Caution For Harness Wire Bypass Connections
Courtesy of NISSAN NORTH AMERICA, INC.