All Signals
WARNING: This page is about a different variant/trim than selected.
- Displays the status of the following vehicle signals inputted into the AV control unit.
- For each signal, actual signal can be compared with the condition recognized on the system.
| Display Item | Display | Vehicle status | Remarks |
|---|---|---|---|
| VHCL SPD SIG | On | Vehicle speed > 0 km/h (0 MPH) | Changes in indication may be delayed. This is normal. |
| Off | Vehicle speed = 0 km/h (0 MPH) | ||
| PKB SIG | On | Parking brake is applied. | |
| Off | Parking brake is released. | ||
| ILLUM SIG | On | Block the light beam from the auto light optical sensor when the light SW is ON. | - |
| Off | Expose the auto light optical sensor to light when the light SW is OFF or ON. | ||
| IGN SIG | On | Ignition switch ON | |
| Off | Ignition switch in ACC position | ||
| REV SIG | On | Selector lever in R position | Changes in indication may be delayed. This is normal. |
| Off | Selector lever in any position other than R |