Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK 12v BATTERY
Check 12v battery. Perform "WORK FLOW ".
Is the inspection result normal?
YES: GO TO 2.
NO: Charge or replace 12v battery. Refer to "REMOVAL AND INSTALLATION ".
- CHECK INTERMITTENT INCIDENT
Perform "INTERMITTENT INCIDENT ".
Is the inspection result normal?
YES: GO TO 3.
NO: Repair or replace error-detected parts.
- PERFORM DTC CONFIRMATION PROCEDURE
- Erase DTC.
- Perform DTC confirmation procedure. Refer to
"DTC LOGIC ".
Is DTC P062F detected again?
YES: Replace HPCM. Refer to "REMOVAL AND INSTALLATION ".
NO: INSPECTION END