LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> QX80 AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> System Description >> System >> Intelligent Key System/Engine Start Function >> INTELLIGENT KEY SYSTEM/ENGINE START FUNCTION: System Description >> Remote Engine Start Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Engine Start Function

Remote engine start function enables engine to be started from vehicle outside by operating REMOTE ENGINE START button of Intelligent Key.

Engine Start Procedures

Press LOCK button of Intelligent Key, and then within five seconds, press and hold REMOTE ENGINE START button of Intelligent Key for two seconds or more. Engine starts. Engine does not start while the vehicle is in the following status.

NOTE:
  • Engine operation status described in the following 2 types
    • Normal engine run mode: Ordinary operation status of engine. Driving is allowed.
    • Remote engine run mode: Operation status of engine according to REMOTE ENGINE START button operation of Intelligent Key. Driving is not allowed.
  • During remote engine run mode, the following display is indicated on information display in combination meter.
    Display Display ON condition Display OFF condition
    G08877924
    During remote engine run mode Mode switch to normal engine run mode from remote engine run mode
  • While engine is in operation by Intelligent Key, engine status changes from remote engine run mode to normal engine run mode when push-button ignition switch is operated while brake pedal is depressed. The vehicle becomes available to drive.

Engine Stop Procedures

Press REMOTE ENGINE START button of Intelligent Key. Engine stops. Engine stops when the vehicle status changes to the following status.

NOTE: While engine is in operation by Intelligent Key, engine operation time can be extended for ten minutes. To extend engine operation time, press LOCK button of Intelligent Key, and then within five seconds, press and hold REMOTE ENGINE START button of Intelligent Key for two seconds or more.

Operation Area

The remote engine start operating range is approximately 60 m (197 ft.) from the vehicle.