September 30: LEMON manuals is back up on a temporary server! Slowness is possible

General Specifications

WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

2WD MODELS

Applied model	Axle	2WD
	Engine	VR30DDTT
	Transmission	A/T
Propeller shaft model		C-C-R/C
Number of joints		3
Joint type	1st joint	Universal (Shell type)
	2nd joint	Universal (Shell type)
	3rd joint	Rubber coupling type
Coupling method	Transmission side	Sleeve type
	Rear final drive side	Flange type
Shaft length	1st shaft (Spider to spider)	757.0 mm (29.80 in)
	2nd shaft (Spider to rubber coupling center)	689.0 mm (27.13 in)
Shaft outer diameter	1st shaft	75.0 mm (2.953 in)
	2nd shaft	65.0 mm (2.559 in)

AWD MODELS

Applied model	Axle	AWD
	Engine	VR30DDTT
	Transmission	A/T
Propeller shaft model		C-C-R/C
Number of joints		3
Joint type	1st joint	Universal (Shell type)
	2nd joint	Universal (Shell type)
	3rd joint	Rubber coupling type
Coupling method	Transfer side	Flange type
	Rear final drive side	Flange type
Shaft length	1st shaft (Spider to spider)	514.0 mm (20.24 in)
	2nd shaft (Spider to rubber coupling center)	709.0 mm (27.91 in)
Shaft outer diameter	1st shaft	75.0 mm (2.953 in)
	2nd shaft	65.0 mm (2.559 in)