LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Driver Assistance System (Introduction) (Except Hybrid) >> System Description >> System >> LDW (With Direct Adaptive Steering System) >> System Description >> Input/Output Signal Item
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Item

Reception unit Transmit unit Signal name Description
Chassis control module Lane camera unit Chassis communication Detected lane condition signal Receives detection results of lane marker
Lane camera unit condition signal Receives lane camera unit condition
ABS actuator and electric unit (control unit) CAN communication Vehicle speed signal (ABS) Receives wheel speeds of front wheels
BCM CAN communication Turn indicator signal Receives an operational state of the turn signal lamp and the hazard lamp
Front wiper request signal Receives an operational state of the front wiper
ADAS control unit Chassis communication LDW ON signal Receives an ON/OFF state of LDW
Drive mode select switch Hard wire Drive mode select switch signal Detects the snow mode selection.
ADAS control unit Display control unit CAN communication System selection signal Receives a selection state of each item in "Driver Aids" selected with the integral switch.
Lane camera unit Chassis control module Chassis communication Vehicle speed signal Transmits a vehicle speed calculated by the chassis control module
Turn indicator signal Transmits a turn indicator signal received from BCM
Combination meter
(Via ADAS control unit)
Chassis communication LDW system display signal Transmits a signal to display a state of the system on the information display
Driver assistance buzzer control module
(Via ADAS control unit)
Warning buzzer signal Transmits warning buzzer signal to activates the warning buzzer