Freeze Frame Data (FFD)
When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.
| Item Name | Indication/Unit | Display Item |
|---|---|---|
| ODO/TRIP METER | km | Total mileage (Odometer value) of the moment a particular. |
| DTC LOCAL CODE | - | DTC code is displayed but not used. |
| IGN VOLT | V | Displays the ignition power supply voltage. |
| VEHICLE SPEED | km | Displays the vehicle speed. |
| FR WHEEL SPEED | RPM | Displays the rotational speed of front RH tire. |
| FL WHEEL SPEED | RPM | Displays the rotational speed of front LH tire. |
| RR WHEEL SPEED | RPM | Displays the rotational speed of rear RH tire. |
| RL WHEEL SPEED | RPM | Displays the rotational speed of rear LH tire. |
| STEERING ANG SENSOR | deg | Displays the steering angle from the Steering Angle Sensor. |
| DECEL G SENSOR | G | Displays the decel G. |
| SIDE G SENSOR | G | Displays the side G. |
| YAW RATE SENSOR | deg/s | Displays the yaw rate. |
| ACCELE PEDAL POSITION | % | Displays the accelerator pedal position. |
| SHIFT POSITION | Off / P / R / N / D (A) / S / L / B / 1- 6 / M 1 -M 8 / A 1 - A 6 | Displays the shift position. |
| BRAKE SWITCH 2 | Off / On | Displays brake pedal operating status. |
| BRAKE SWITCH 1 | Off / On | Displays brake pedal operating status. |
| STOP LAMP SW | ACT / INACT | Displays the stop lamp switch status. |
| PRESS SENSOR | bar | Displays the brake fluid pressure. |
| ABS | NORMAL / ABNOR | Displays ABS function status. |
| ABS MALF | Off / On | Displays ABS function malfunction status. |
| TCS | NORMAL / ABNOR | Displays TCS function status. |
| TCS MALF | Off / On | Displays TCS function malfunction status. |
| VDC | NORMAL / ABNOR | Displays VDC function status. |
| VDC MALF | Off / On | Displays VDC function malfunction status. |
| VDC OFF SW | Off / On | Displays VDC OFF switch status. |
| ACCELE PEDAL MALF | Off / On | Displays accelerator pedal malfunction status. |
| DRIVE MODE SELECTOR | STD / SPORT / SPORT+ / ECO / SNOW / PERSO | Displays the Drive Mode Select Switch selection status. |
| LANE MARKER (LH)* 1 | NOT / DETECT | Displays the lane marker (LH) detection status. |
| LANE MARKER (RH)* 1 | NOT / DETECT | Displays the lane marker (RH) detection status. |
| TURN SIGNAL (LH)* 1 | Off / On | Displays the turn signal switch (LH) operating status. |
| TURN SIGNAL (RH)* 1 | Off / On | Displays the turn signal switch (RH) operating status. |
| TURN SIGNAL SWITCH* 1 | Off / LEFT / RIGHT / MALF | Displays the turn signal switch operating status. |
| CAST* 1 | Off / On | Displays the operation request status to direct adaptive steering. |
| ROAD DISTORTION* 1 | 1/m | Displays the road distortion rate radius. |
| COMMAND ST ANG* 1 | rad | Displays the steering command value to direct adaptive steering. |
| ST WHL FORCE TORQUE* 1 | Nm | Displays the estimated value for the steering wheel force torque. |
| COMMAND ST WHL FORCE* 1 | N | Displays the steering reaction force command value to direct adaptive steering. |
| ADAS COND* 1 | NORMAL / ABNOR | Displays the ADAS Control Unit function status. |
| DDS operating condition* 2 | Off / On | Displays the dynamic digital suspension condition. |
| Engine RPM* 2 | RPM | Displays the engine speed. |
| DMC) CAN signal not receive* 2 | Non detection / Detection | Displays the CAN signal not receive of digital motion control. |
| DMC) CAN signal irregularity 1* 2 | Non detection / Detection | Displays the CAN signal irregularity (message counter) of digital motion control. |
| DMC) CAN signal irregularity 2* 2 | Non detection / Detection | Displays the CAN signal irregularity (checksum) of digital motion control. |
| DMC) CAN signal invalid* 2 | Non detection / Detection | Displays the CAN signal invalid of digital motion control. |
| Stop/Start* 2 | A | Displays the Stop/Start status. |
| FR shock ab command current* 2 | A | Displays the dynamic digital suspension (FR) command current. |
| FL shock ab command current* 2 | A | Displays the dynamic digital suspension (FL) command current. |
| RR shock ab command current* 2 | A | Displays the dynamic digital suspension (RR) command current. |
| RL shock ab command current* 2 | A | Displays the dynamic digital suspension (RL) command current. |
| DMC status* 2 | Inactive / Active 1 /Active 2 / Active 3 /Active 4 /Not connect current line / Active test 1 /Active test 2 / Other Control Unit / CAN Communication / Control unit | Displays the digital motion control status. |
| WIPER STATUS* 1 | Off / LOW / HIGH / MALF | Displays the wiper operating status. |
| CAN DIAG PERMIS CONDITION | Off / On | Displays CAN network diagnosis status. |
| THRTL OPENING | % | Displays the electric throttle position. |
* 1: Models with Active Lane Control
* 2: Models with digital motion control