LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> Q60 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Driver Assistance System (ADAS Control Unit) (Introduction, Basic Diagnosis, DTC/Circuit Diagnosis) (1 Of 2) >> DTC/Circuit Diagnosis >> DTC C1A06: Operation SW >> ADAS Control Unit >> DTC Description >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. CHECK DTC PRIORITY

    If DTC "C1A06" is displayed with DTC "U1000", first diagnose the DTC "U1000".

    Is applicable DTC detected?

    YES 

    Perform diagnosis of applicable. Refer to DTC DESCRIPTION .

    NO 

    GO TO STEP 2  .

  2. PERFORM DTC CONFIRMATION PROCEDURE

    1. Start the engine.
    2. Wait for approximately 5 minutes after turning theMAIN Switch of ICC System ON.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "C1A06" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1A06" detected as the current malfunction?

    YES - 1 

    Refer to DIAGNOSIS PROCEDURE (VR30DDTT)  (VR30DDTT).

    YES - 2 

    Refer to DIAGNOSIS PROCEDURE (2.0 TURBO GASOLINE ENGINE)  (2.0 Turbo Gasoline Engine).

    NO - 1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO - 2 

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals