DTC Confirmation Procedure

If DTC "C1A24-62" is displayed with DTC "U1000-01", first diagnose the DTC "U1000-01".

Is applicable DTC detected?

YES 

Perform diagnosis of applicable. Refer to DTC DESCRIPTION .

NO 

GO TO STEP 2  .

1. Start the engine.
2. Turn the LDP system ON.
3. Wait for approximately 5 minutes or more after shifting the selector lever to "P" position.
4. Perform "All DTC Reading" with CONSULT.
5. Check if the "C1A24-62" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS 2".

Is "C1A24-62" detected as the current malfunction?

YES 

Refer to DIAGNOSIS PROCEDURE .

NO 

GO TO STEP 3. 

1. Wait for approximately 5 minutes or more after shifting the selector lever to "N" position.
2. Perform "All DTC Reading".
3. Check if the "C1A24-62" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS 2".

Is "C1A24-62" detected as the current malfunction?

YES 

Refer to DIAGNOSIS PROCEDURE .

NO - 1 

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO - 2 

Confirmation after repair: INSPECTION END