Component Function Check

1. Disconnect horn relay 2.
2. Perform "VEHICLE SECURITY HORN" in "ACTIVE TEST" mode of "THEFT ALM" of "BCM" using CONSULT.
3. Check the horn operation.

   Test item		Description
   VEHICLE SECURITY HORN	ON	Horn high	Sounds (for 0.5 sec.)

Is the operation normal?

YES 

GO TO STEP 2  .

NO 

Refer to DIAGNOSIS PROCEDURE .

1. Reconnect horn relay 2.
2. Disconnect horn relay 1.
3. Perform "VEHICLE SECURITY HORN" in "ACTIVE TEST" mode of "THEFT ALM" of "BCM" using CONSULT.
4. Check the horn operation.

   Test item		Description
   VEHICLE SECURITY HORN	ON	Horn low	Sounds (for 0.5 sec.)

Is the operation normal?

YES 

INSPECTION END

NO 

Refer to DIAGNOSIS PROCEDURE .