Component Function Check

1. Select "TELESCO PULSE" in "Data monitor" mode of "AUTO DRIVE POS." with CONSULT.
2. Check Telescopic Sensor signal under the following conditions.

   Monitor Item	Condition		Value
   TELESCO PULSE	Steering telescopic	Operate (forward)	Change (increase)*1
   		Operate (backward)	Change (decrease)*1
   		Release	No change*1

   ^*1 : The value at the seat position attained when the battery is connected is considered to be 32768.

Is the indication normal?

YES 

INSPECTION END

NO 

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .