Data Monitor
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
: Applicable
| Item (Unit) | Monitor item selection | Note | |
|---|---|---|---|
| INPUT SIGNALS | MAIN ITEMS | ||
| FR LH SENSOR [km/h (MPH)] |
* | * | Wheel speed calculated by front LH Wheel Sensor is displayed. |
| FR RH SENSOR [km/h (MPH)] |
* | * | Wheel speed calculated by front RH Wheel Sensor is displayed. |
| RR LH SENSOR [km/h (MPH)] |
* | * | Wheel speed calculated by rear LH Wheel Sensor is displayed. |
| RR RH SENSOR [km/h (MPH)] |
* | * | Wheel speed calculated by rear RH Wheel Sensor is displayed. |
| BATTERY VOLT (V) |
* | * | Voltage supplied to ABS Actuator And Electric Unit (Control Unit) is displayed. |
| STOP LAMP SW (On/Off) |
* | * | Stop Lamp Switch signal input status is displayed. |
| YAW RATE SEN (d/s) |
* | * | Yaw rate detected by yaw rate sensor is displayed. |
| FR RH IN SOL (On/Off) |
* | Operation status of front RH wheel ABS IN valve is displayed. | |
| FR RH OUT SOL (On/Off) |
* | Operation status of front RH wheel ABS OUT valve is displayed. | |
| FR LH IN SOL (On/Off) |
* | Operation status of front LH wheel ABS IN valve is displayed. | |
| FR LH OUT SOL (On/Off) |
* | Operation status of front LH wheel ABS OUT valve is displayed. | |
| RR RH IN SOL (On/Off) |
* | Operation status of rear RH wheel ABS IN valve is displayed. | |
| RR RH OUT SOL (On/Off) |
* | Operation status of rear RH wheel ABS OUT valve is displayed. | |
| RR LH IN SOL (On/Off) |
* | Operation status of rear LH wheel ABS IN valve is displayed. | |
| RR LH OUT SOL (On/Off) |
* | Operation status of rear LH wheel ABS OUT valve is displayed. | |
| MOTOR RELAY (On/Off) |
* | ABS motor and motor relay status is displayed. | |
| ACTUATOR RLY (On/Off) |
* | ABS actuator relay status is displayed. | |
| ABS WARN LAMP (On/Off) |
* | ABS Warning Lamp ON/OFF status is displayed. (Note 1) | |
| OFF LAMP (On/Off) |
* | VDC OFF Indicator Lamp ON/OFF status is displayed.(Note 1) | |
| SLIP/VDC LAMP (On/Off) |
* | VDC Warning Lamp ON/OFF status is displayed.(Note 1) | |
| ACCEL POS SIG (%) |
* | Displays the Accelerator Pedal Position | |
| SIDE G-SENSOR (m/s2 ) |
* | Side G detected by side G sensor is displayed. | |
| DECEL G-SEN (G) |
* | * | Decel G detected by decel G sensor is displayed. |
| STR ANGLE SIG(Note 2) (°) |
* | Steering Pinion Angle detected by Direct Adaptive Steering system is displayed. | |
| STR ANGLE SIG(Note 3) (°) |
* | Steering angle detected by Steering Angle Sensor is displayed. | |
| ENGINE SPEED (RPM) |
* | * | Engine speed status is displayed. |
| PRESS SENSOR (bar) |
* | Brake fluid pressure detected by pressure sensor is displayed. | |
| FLUID LEV SW (On/Off) |
* | Brake fluid level signal input status via CAN Communication is displayed. | |
| PARK BRAKE SW (On/Off) |
* | Parking Brake Switch signal input status via CAN Communication is displayed. | |
| CV1 (On/Off) |
Cut valve 1 operation status is displayed. | ||
| CV2 (On/Off) |
Cut valve 2 operation status is displayed. | ||
| EBD SIGNAL (On/Off) |
EBD operation status is displayed. | ||
| ABS SIGNAL (On/Off) |
ABS operation status is displayed. | ||
| TCS SIGNAL (On/Off) |
TCS operation status is displayed. | ||
| VDC SIGNAL (On/Off) |
VDC operation status is displayed. | ||
| EBD FAIL SIG (On/Off) |
EBD fail-safe signal status is displayed. | ||
| ABS FAIL SIG (On/Off) |
ABS fail-safe signal status is displayed. | ||
| TCS FAIL SIG (On/Off) |
TCS fail-safe signal status is displayed. | ||
| VDC FAIL SIG (On/Off) |
VDC fail-safe signal status is displayed. | ||
| CRANKING SIG (On/Off) |
Cranking status is displayed. | ||
| EBD WARN LAMP (On/Off) |
Brake Warning Lamp ON/OFF status is displayed. (Note 1) | ||
| GEAR | * | * | Current gear position judged from current gear position signal is displayed. |
| N POSI SIG (On/Off) |
N range signal input status judged from N range signal is displayed. | ||
| R POSI SIG (On/Off) |
R range signal input status judged from R range signal is displayed. | ||
| 4WD MODE MON(Note 4) (AUTO/LOCK/2WD) |
* | * | AWD control status is displayed. |
| VDC control mode(Note 5) (Standard/Sports) |
VDC control status configured with the drive mode selector is displayed. | ||
| USS SIG(Note 6) (On/Off) |
Hill Start Assist operation status is displayed. | ||
Note 1: Refer to SYSTEM DESCRIPTION for ON/OFF conditions of each Warning Lamp and Indicator Lamp.
Note 2: Models with Direct Adaptive Steering system
Note 3: Models without Direct Adaptive Steering system
Note 4: AWD models
Note 5: VR30DDTT engine models
Note 6: "USS" means "Hill Start Assist"