DTC Detection Logic

DTC		CONSULT Screen Terms		DTC Detecting Condition
DTC		(Trouble Diagnosis Content)	[Malfunction Type]	DTC Detecting Condition
P0607	04	CONTROL MODULE (Control module performance)	SYSTEM INTERNAL MALFUNCTN	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. There is an internal malfunction.
				Diagnosis delay time	-
	09		COMPONENT MALFUNCTION	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. There is a component malfunction.
				Diagnosis delay time	-
	-		-	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction.
				Diagnosis delay time	-
	12		CIRCUIT SHORT TO BATTERY	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. There is a short circuit to positive.
				Diagnosis delay time	-
	14		CIRC SHORT TO GRND OR OPEN	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. There is a short circuit to ground or an open circuit.
				Diagnosis delay time	-
	16		CIRC VOLT BELOW THRESHOLD	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. The limit value for electrical voltage has not been attained.
				Diagnosis delay time	-
	18		CIRC CRRNT BELOW THRESHLD	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. The limit value for current has not been attained.
				Diagnosis delay time	-
	41		GENERAL CHECKSUM ERROR	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. There is a general checksum error.
				Diagnosis delay time	-
P0607	48	CONTROL MODULE (Control module performance)	SUPERVISION SOFTWARE ERROR	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. There is an error in the control memory.
				Diagnosis delay time	-
	62		SIGNAL COMPARE ERROR	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. The signal comparison error.
				Diagnosis delay time	-
	64		SIGNAL PLAUSIBILITY ERROR	Diagnosis condition	-
				Signal (terminal)	-
				Threshold	The control unit has a malfunction. There is an implausible signal.
				Diagnosis delay time	-