How To Set
With CONSULT
Perform "AIR FLOW REDUCTION SETTING" in "WORK SUPPORT" mode of "HVAC" using CONSULT.
| Work Support Items | Display | Setting |
|---|---|---|
| AIR FLOW REDUCTION SETTING | Prohibition | Air flow is not reduced during stop/start operation. |
| Permission* | Air flow is reduced during stop/start operation. |
* : Initial status
NOTE:
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of the air flow reduction control setting during the sop/start system operation may be cancelled.