How To Set
With CONSULT
Perform "AIR INLET CHANGE SETTING" in "WORK SUPPORT" mode of "HVAC" using CONSULT.
| Work Support Items | Display | Setting |
|---|---|---|
| AIR INLET CHANGE SETTING | Prohibition | Intake switch cannot be change during stop/start operation. |
| Permission* | Intake switch can be change during stop/start operation. |
* : Initial status
NOTE:
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of the air inlet change control setting during the stop/start system operation may be cancelled.