Detail Flow - Tilt & Telescopic
| Order | Input | Output | Control Unit Condition |
|---|---|---|---|
| 1 | Tilt & Telescopic Switch | - | The Tilt & Telescopic Switch signal is inputted to the Automatic Drive Positioner Control Unit when the Tilt & Telescopic Switch is operated. |
| 2 | - | Motors (Tilt, telescopic) |
The Automatic Drive Positioner Control Unit actuates each Motor according to the operation of the Tilt & Telescopic Switch. |
NOTE:
The tilt & telescopic can be operated manually when Ignition Switch is in either ACC or ON position.