Active Test: Notes
CAUTION:
- Never perform active test while driving vehicle.
- Make sure to completely bleed air from brake system.
- The active test cannot be started when ABS Warning Lamp, VDC Warning Lamp and brake Warning Lamp are ON.
- ABS Warning Lamp, VDC Warning Lamp and brake Warning Lamp are ON during active test.
- Erase memory of the lane camera unit after implementing active test. Refer to CONSULT FUNCTION (LANE CAMERA) .
NOTE:
- "TEST IS STOPPED" in "ABS" with CONSULT is displayed 10 seconds after operation start.
- After "TEST IS STOPPED" in "ABS" with CONSULT is displayed, to perform test again.