| P0335 |
Crankshaft Position Sensor (POS) Circuit |
- The crankshaft position Sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
- The proper pulse signal from the crankshaft position Sensor (POS) is not sent to ECM while the engine is running.
- The crankshaft position Sensor (POS) signal is not in the normal pattern during engine running.
|
- Harness or connectors
[CKP Sensor (POS) Circuit is open or shorted.]
(APP Sensor 2 Circuit is shorted.)
(EVAP Control System Pressure Sensor Circuit is shorted.)
(Refrigerant pressure Sensor Circuit is shorted.)
- Crankshaft Position Sensor (POS)
- Accelerator pedal position Sensor
- EVAP Control System Pressure Sensor
- Refrigerant pressure Sensor
- Signal plate
|