DTC Detection Logic

NOTE:

If DTC P0340 or P0345 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to DTC LOGIC .

DTC No.	Trouble Diagnosis Name	DTC Detecting Condition	Possible Cause
P0340	Camshaft Position Sensor (PHASE) (Bank 1) Circuit	The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking. The cylinder No. signal is not sent to ECM during engine running. The cylinder No. signal is not in the normal pattern during engine running.	Harness or connectors [CMP Sensor (PHASE) (Bank 1) Circuit is open or shorted.] Camshaft Position Sensor (PHASE) (Bank 1) Camshaft (INT) Starter motor Starting system Circuit Dead (Weak) battery
P0345	Camshaft Position Sensor (PHASE) (Bank 2) Circuit		Harness or connectors [CMP Sensor (PHASE) (Bank 2) Circuit is open or shorted.] Camshaft Position Sensor (PHASE) (Bank 2) Camshaft (INT) Starter Motor Starting System Circuit Dead (Weak) battery