Diagnostic Test
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to DESCRIPTION .
NOTE:If "READ CONFIGURATION" cannot be used, use the "WRITE CONFIGURATION - Manual selection" after replacing high beam assist control module.
GO TO STEP 2 .
- REPLACE HIGH BEAM ASSIST CONTROL MODULE
Replace inside mirror assembly (high beam assist control module). Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION" to write vehicle specification. Refer to DESCRIPTION .
WORK END