For MEXICO
| Item | Standard | |||
|---|---|---|---|---|
| Measurement wheel | Left side | Right side | ||
| Camber Degree minute (Decimal degree) |
Minimum | - 0°45' (- 0.75°) | - 0°55' (- 0.91°) | |
| Nominal | 0° 00' (0.00°) | - 0°10' (- 0.17°) | ||
| Maximum | 0° 45' (0.75°) | 0° 35' (0.58°) | ||
| Left and right difference | 0° 33' (0.55°) or less | |||
| Caster Degree minute (Decimal degree) |
Minimum | 2° 20' (2.34°) | 2° 40' (2.67°) | |
| Nominal | 3° 05' (3.08°) | 3° 25' (3.42°) | ||
| Maximum | 3° 50' (3.83°) | 4° 10' (4.16°) | ||
| Left and right difference | 0° 45' (0.75°) or less | |||
| Kingpin inclination Degree minute (Decimal degree) |
Minimum | - | - | |
| Nominal | 13° 20' (13.33°)* 1 | 13° 25' (13.42°)* 1 | ||
| Maximum | - | - | ||
| Toe - in | Total toe - in Distance |
Minimum | In 0.4 mm (In 0.016 in) | |
| Nominal | In 2.4 mm (In 0.094 in) | |||
| Maximum | In 4.4 mm (In 0.173 in) | |||
| Total toe - angle Degree minute (Decimal degree) |
Minimum | In 0° 02' (In 0.04°) | ||
| Nominal | In 0° 10' (In 0.17°) | |||
| Maximum | In 0° 18' (In 0.30°) | |||
Measure value under unladen* 2 conditions.
* 1: The minimum value and maximum value is the same as the nominal value.
* 2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.