LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX60 FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Basic Inspection >> Calibration Of DECEL G Sensor >> Work Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Work Procedure

  1. PERFORM CALIBRATION OF DECEL G SENSOR (ABS) 

    Perform calibration of decel G sensor. Refer to Work Procedure (TYPE 1), Work Procedure (TYPE 2).

    GO TO 2.

  2. PREPARATION BEFORE CALIBRATION PROCEDURE 
    1. Park the vehicle on a level surface.
    2. Adjust air pressure of all tires to the specified pressure. Refer to Tire Air Pressure .

    GO TO 3.

  3. PERFORM CALIBRATION OF DECEL G SENSOR (TCM) 

    SYMBOL With CONSULT

    1. Turn ignition switch ON.
      CAUTION: Never start engine.
    2. Select "Work Support" in "TRANSMISSION".
    3. Select "G SENSOR CALIBRATION".
    4. Touch "Start".
      CAUTION: Do not rock or jounce the vehicle during "G sensor calibration".

    Is "COMPLETED" displayed?

    YES

    WORK END

    NO

    Perform steps 3 again.

scientia non olet · About LEMON Manuals