Component Inspection

1. Turn ignition switch OFF.
2. Disconnect A/F sensor 1 harness connector.
3. Check resistance between A/F sensor 1 terminals as follows.

   A/F sensor 1		Condition		Resistance
   +	-
   Terminal
   1	2	Temperature	25°C (77°F)	1.80 - 2.44 Ω
   	3			∞ (Continuity should not exist)
   	4
   2	3
   	4
   3	4

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace malfunctioning A/F sensor 1. Refer to TURBOCHARGER : Exploded View .