Confirmation Procedure
- PRECONDITIONING
If "Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
>>
GO TO 2.
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Start the engine.CAUTION:
Never drive the vehicle.
- Perform self-diagnosis for "DAST 1".
Is DTC "C13AE-00" detected?
YES>>
Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .
NO-1>>
To check malfunction symptom before repair: Refer to Inspection .
NO-2>>
Confirmation after repair: INSPECTION END
- Start the engine.