LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1991 >> Rodeo S, 2.6 E, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Removal & Installation (Except 2.3L & 2.6L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Except 2.3L & 2.6L)

Bring No. 1 cylinder to TDC of compression stroke and align timing marks. Disconnect negative battery cable. Remove high tension wires and distributor connector. Note direction rotor points for installation reference. Remove mounting bolt and distributor. To install, reverse removal procedure. Set ignition timing.

scientia non olet · About LEMON Manuals