LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1993 >> Rodeo LS, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (CARBURETED) >> Carburetor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Remove air cleaner assembly. Remove vacuum hoses, noting hose locations for installation. Remove fuel inlet hose and accelerator cable.
  2. Disconnect electrical connectors, and set them aside. Remove carburetor mounting nuts using Carburetor Wrench (J-26510) . Remove carburetor. To install, reverse removal procedure. Tighten carburetor mounting nuts to specification. See TORQUE SPECIFICATIONS .
CAUTION: DO NOT immerse diaphragms, electrical components or rubber parts in carburetor cleaner.
scientia non olet · About LEMON Manuals