Fuel Injectors
WARNING: This page is about a different car, the 1995 Isuzu Rodeo. However, it is still accessible from the selected car via links, so may be relevant.
- Unplug fuel injector harness at injector. Using ohmmeter, measure resistance across terminals. Replace fuel injectors if resistance is not within specification. See FUEL INJECTOR RESISTANCE SPECIFICATIONS table.
- With engine running, check fuel injector operating noise. Normal operation of injectors is indicated if a regular click is heard, which varies with engine speed. If click is not heard, replace injector.
FUEL INJECTOR RESISTANCE SPECIFICATIONS
| Application | Ohms |
|---|---|
| Rodeo & Passport | 13.8 |
NOTE:
FUEL INJECTOR BALANCE TEST is also known as CHART C-2A.
CAUTION:
To prevent flooding, entire test should not be repeated more than once.