LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1997 >> Rodeo LS, 2.6 E >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.6L >> Circuit Testing >> DTC P0351 - Ignition Control Circuit >> Diagnostic Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedures

  1. Perform On-Board Diagnostic (OBD) System Check. See BASIC TESTING article. Go to next step.
  2. Check ignition control module for poor connection or damaged terminals. If a problem is found, repair as necessary. Retest system. If no problem is found, go to next step.
  3. Check PCM connector for poor connection or damaged terminals. If a problem is found, repair as necessary. Retest system. If no problem is found, go to next step.
  4. Turn ignition off. Disconnect harness from PCM and ignition control module. Check ignition control circuit for an open, short to ground or voltage. If a problem is found, repair as necessary. Retest system. If no problem is found, go to next step.
  5. Replace ignition control module. Retest system. If problem still exists, go to next step.
  6. Replace PCM. Program replacement PCM using required equipment. Retest system.
scientia non olet · About LEMON Manuals