October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

1. Apply sealer or the equivalent to the threads of the ECT sensor.
2. Install the ECT sensor in the coolant crossover.

Tighten:Tighten the ECT sensor to 30 N.m (22 lb ft.).

3. Connect the electrical connector.
4. Fill the radiator with coolant. Refer to Draining and Refilling Cooling System in Engine Cooling.
5. Connect the negative battery cable.