Master Switch Test
Remove power window master switch. See POWER WINDOW MASTER SWITCH
under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance of switch terminals with switch in indicated positions. If continuity is not as specified, replace switch. See Figure
. See POWER WINDOW MASTER SWITCH TEST
table.
POWER WINDOW MASTER SWITCH TEST
| Switch Position |
Main Switch |
Terminal Continuity |
| Left Front Switch |
N/A |
|
| Right Front Switch |
| Off |
On |
A10, A12 & B2 |
| Off |
A10 & A12 |
| Up |
On |
A1 & A12; A10 & B2 |
| Off |
A1 & A12 |
| Down |
On |
A1 & A10; A12 & B2 |
| Off |
A1 & A10 |
| Right Rear Switch |
| Off |
On |
A9, A11 & B2 |
| Off |
A9 & A11 |
| Up |
On |
A2 & A11; A9 & B2 |
| Off |
A2 & A11 |
| Down |
On |
A2 & A9; A11 & B2 |
| Off |
A2 & A9 |
| Left Rear Switch |
| Off |
On |
A13, A15 & B2 |
| Off |
A13 & A15 |
| Up |
On |
A6 & A15; A13 & B2 |
| Off |
A6 & A15 |
| Down |
On |
A6 & A13; A15 & B2 |
| Off |
A6 & A13 |