LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1999 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Ground Circuits
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ground Circuits

  1. Disconnect PCM connectors. Using an ohmmeter, check for continuity to ground on PCM harness ground terminals. See PCM GROUND CIRCUIT TERMINALS  table. Resistance should be zero ohms. If not, locate and repair open in wire.
    PCM GROUND CIRCUIT TERMINALS

    Vehicle PCM Connector Terminal No.
    Hombre C1 18
    C1 60
    C2 21
    Except Hombre White C7
    White C8
    White C9
  2. Reconnect PCM connectors. Using a voltmeter, connect negative lead of voltmeter to a good ground. Backprobe positive lead of voltmeter to each ground terminal. With vehicle running, voltmeter should indicate less than one volt. If voltmeter reading is greater than one volt, check for open, short, corrosion or loose connection on ground circuit. Repair as necessary.
scientia non olet · About LEMON Manuals