LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2000 >> Trooper LS, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft & Keyless Entry Systems >> Programming >> Programming New Id Code >> Remote Keyless Entry System (Trooper)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Keyless Entry System (Trooper)

  1. Ensure that all doors are closed and unlocked. Open driver's door. Insert key into ignition. Go to next step.
  2. Turn ignition switch to ACC position, then to OFF position 3 times within 5 seconds after completing step  1. Go to next step.
  3. Close driver's door and open it 2 times within 10 seconds after completing step  2. Go to next step.
  4. Turn ignition switch to ACC position, then to OFF position 5 times. Close driver's door and open it. This step must be completed within 10 seconds after step  3. The control unit should lock and unlock doors one time. If it does, go to next step. If doors did not lock and unlock one time, go back to step  1.
  5. Depress the LOCK or UNLOCK button of transmitter within 20 seconds after step  4. The control unit should lock and unlock doors one time. If it does, go to next step. If doors did not lock and unlock one time, go back to step  1.
  6. Depress the LOCK or UNLOCK button of transmitter within 20 seconds after step  5. Control unit will compare temporary ID code with receiving ID code. If codes are the same, control unit will lock and unlock doors one time. If it does, programming is complete. If codes are not the same, control unit will lock and unlock doors 3 times. Go back to step  1 and attempt to reprogram ID code again.
scientia non olet · About LEMON Manuals