LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2001 >> Rodeo LSE, 2.2 D >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Computer Relearn Procedures) >> Computer Relearn Procedures >> "S" & "T" Bodies >> Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (2.2L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (2.2L)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 1998 Pontiac Trans Sport, 1998 Oldsmobile Silhouette, 1998 Oldsmobile Bravada, 1998 GMC Yukon, and 1998 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. If Powertrain Control Module (PCM) was replaced, the EPROM in the PCM must be programmed. If EEPROM is not programmed, a Diagnostic Trouble Code (DTC) will be set in the PCM. Perform EEPROM programming using the Techline equipment manufacturer's instructions and latest software applicable for the vehicle model.
  2. Once EEPROM is reprogrammed, the Crankshaft Position (CKP) sensor variation learn procedure must be performed using proper procedure.
scientia non olet · About LEMON Manuals