Code Enable Criteria

Following conditions must be met for DTC diagnostic test to run:

• Engine running.
• No MAP, ECT, TP, CKP, EGR, EVAP, injector or misfire DTCs set.
• ECT reading is 14°F (-10°C) or more.
• IAC counts are between 10 and 160 counts.
• MAP value changes by less than 2 kPa.

Above conditions are met for 100 test failures within 200 test sample (125 msec/test).

Stuck High -

• MAP value is less than 55 kPa.
• Actual TP sensor value is more than the PCMs estimated TP sensor valve (estimated TP value is based on MAP and RPM signals).

Stuck Low -

• MAP value is 50 kPa or more.
• Actual TP sensor value is less than the PCMs estimated TP sensor valve (estimated TP value is based on MAP and RPM signals).