September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Center Track Rod Assembly: Removal
- Raise the vehicle and support the frame with suitable safety stands.
- Remove nut and cotter pin, then use remover J-36831 to disconnect outer track rod assembly from
the center track rod.
CAUTION:
Be careful not to damage the ball joint boot.
Courtesy of ISUZU MOTOR CO.
- Remove nut and cotter pin then use remover J-36831 to remove pitman arm from the center track rod.
CAUTION:
Be careful not to damage the ball joint boot.
Courtesy of ISUZU MOTOR CO.
- Remove nut and cotter pin then use remover J-36831 to remove relay lever from the center track rod.
CAUTION:
Be careful not to damage the ball joint boot.
Courtesy of ISUZU MOTOR CO.
- Remove center track rod assembly.