Circuit Description

The ignition relay is a normally open relay. The relay armature is held in open position by spring tension. When ignition switch is turned to run or start position, current will flow through relay coil. A wire connected to other end of relay coil completes path to ground. The electromagnetic field created by relay coil, overcomes spring tension and moves armature allowing relay contacts to close. The closed relay contacts allow current to flow from battery to following fuses: PCM 1, ETC/ECM, INJ 1, INJ 2 and SEA fuse, if equipped.

When ignition switch is turned off, electromagnetic field collapses. This action allows spring tension to move armature away from relay contacts, which interrupts current flow to fuses. If ignition relay fails to close, engine will crank, but will not run. The class 2 communications will be available with use of a scan tool.