LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2004 >> Ascender LS, 5.3 P, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 5.3L >> Repair Instructions >> Fuel Sender Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Fuel Sender Assembly
    GM734516Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Remove the fuel feed and return lines from the sender assembly. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  3. Using J 44402  , remove the fuel sender lock ring.
  4. Remove the fuel sender assembly and seal. Discard the seal.
    CAUTION: Refer to Fuel Storage Caution in Cautions and Notices.
  5. Clean the fuel sender sealing surfaces.
scientia non olet · About LEMON Manuals