LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2004 >> Ascender LS, 5.3 P, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 5.3L >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

IMPORTANT: Clean all the fuel pipe connections and surrounding areas before disconnecting the pipes in order to avoid possible contamination of the fuel system.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel return line from the sender assembly. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  3. Disconnect the fuel feed line from the fuel filter. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  4. Cap the fuel sender assembly pipes.
    Fig 1: Locating EVAP Components
    GM887437Courtesy of GENERAL MOTORS CORP.
  5. Disengage the fuel lines from the clip (7) at the front of the fuel tank.
  6. Remove the fuel lines.
scientia non olet · About LEMON Manuals