Front Wheel Speed Sensor: Installation
- Install speed sensor and take care not to hit the speed sensor pole during installation.
- Install speed sensor fixing bolt and tighten the fixing bolt to the specified torque.
Torque: 7.5 N.m (66 lb in)
- Install speed sensor cable fixing bolt (Upper Arm and Knuckle side) and tighten the fixing bolt to the specified torque.
Torque: 7.5 N.m (66 lb in)
- Install speed sensor cable fixing bolt (Frame side) and tighten the fixing bolt to the specified torque.
Torque: 10 N.m (87 lb in)
NOTE: Confirm that the cable is not twisted when connecting the speed sensor cable. - Install speed sensor connector.