Lamps Test

This test is conducted check MIL and Low Fuel Lamp for its working.

Tech 2 must be used for this test.

Test Procedure: 

1. Connect Tech 2 to the vehicle DLC.
2. Run the Engine at idle.
3. Select F3: Miscellaneous Test in the Application Menu.
   Fig 1: Selecting F3: Miscellaneous Test In Application Menu

   Courtesy of ISUZU MOTOR CO.
4. Select F0: Lamps Test in the Miscellaneous Test.
   Fig 2: Selecting F0: Lamps Test In Miscellaneous Test

   Courtesy of ISUZU MOTOR CO.
5. Select F0: Malfunction Indicator Lamp.
6. Push "On" soft key.
7. Make sure Lamp illuminates.
8. If Lamp illuminates, the Lamp is operating correctly.
9. Select F1: Cruise Set Lamp.
10. Push "On" soft key.
11. Make sure Lamp illuminates.
12. If Lamp illuminates, the Lamp is operating correctly.