LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2004 >> Rodeo 3.2 W, 4WD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - System & Component Testing) >> Miscellaneous >> A/C Clutch Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Clutch Relay

WARNING: This page is about a different car, the 2003 Isuzu Rodeo Sport, 2003 Isuzu Rodeo, and 2003 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect A/C clutch relay. A/C clutch relay is located in under-hood fuse/relay box. Using proper mini-schematic and DVOM, check continuity between A/C clutch relay winding terminals. See WIRING DIAGRAMS in appropriate A/C-HEATER SYSTEMSarticle. Continuity should be present. Check continuity between clutch drive circuit terminals of relay. Continuity should not be present.
  2. Using jumper wires, apply ground and battery voltage to relay winding terminals. Continuity should now be present between clutch drive circuit terminals of relay. Replace A/C clutch relay if continuity is not present.
scientia non olet · About LEMON Manuals